2-0-Produkt-Overview-Header-(1).png

Oil Level Sensor

  • Oil Level 1

Oil Level Sensor

Sensor monitors correct engine oil level to avoid overfill or under fill during driving or at key-on.

  • Oil Level 1
  • Measuring principle: Thermo resistive heated wire
  • Measuring range: 100 mm between min & max
  • Accuracy approx.: ± 3 mm
  • Measuring time: 600 ms
  • Measuring interval: > 15 s
  • Operating temp.: -40 °C to 140 °C
  • Temp. measurement: optional with NTC (± 2 °C)
  • Minimum fixture: M14 x 1,25
  • Length of wire: 10 mm to 115 mm
  • Constant Current Source: 200 mA ± 1 mA
  • Potential U0: 0 ... 6500 mV
  • Potential dfiference U=U1-U0: 0 ... 1500 mV
  • Oil Level 1
  • Overfill and low level indication
  • Absolute measurement of oil level in static and dynamic conditions
  • Exact oil monitoring in less than 0,7 s
  • Common use of the existing electronic of the ECU or Dashboard
  • Replacement of oil dipstick
  • Different mounting positions
  • Temperature measurement optional
  • No high temperature electronics required
  • Best economical solution for continuous dynamic oil-measurement
  • 2-Wire-Interface / 4-Wire-Interface (including NTC)
  • Small required space in the oil pan; Easy screw-in assembling
  • Eliminates need for oil dip stick
  • Oil Level 1

Oil Level Sensor

Sensor monitors correct engine oil level to avoid overfill or under fill during driving or at key-on.

  • Oil Level 1
  • Measuring principle: Thermo resistive heated wire
  • Measuring range: 100 mm between min & max
  • Accuracy approx.: ± 3 mm
  • Measuring time: 600 ms
  • Measuring interval: > 15 s
  • Operating temp.: -40 °C to 140 °C
  • Temp. measurement: optional with NTC (± 2 °C)
  • Minimum fixture: M14 x 1,25
  • Length of wire: 10 mm to 115 mm
  • Constant Current Source: 200 mA ± 1 mA
  • Potential U0: 0 ... 6500 mV
  • Potential dfiference U=U1-U0: 0 ... 1500 mV
  • Oil Level 1
  • Overfill and low level indication
  • Absolute measurement of oil level in static and dynamic conditions
  • Exact oil monitoring in less than 0,7 s
  • Common use of the existing electronic of the ECU or Dashboard
  • Replacement of oil dipstick
  • Different mounting positions
  • Temperature measurement optional
  • No high temperature electronics required
  • Best economical solution for continuous dynamic oil-measurement
  • 2-Wire-Interface / 4-Wire-Interface (including NTC)
  • Small required space in the oil pan; Easy screw-in assembling
  • Eliminates need for oil dip stick